全球主要安全认证标志-专业机房设备,南京服务器机柜,机柜,网络机柜,服务器机柜,监控屏幕墙,PDU,KVM切换器-南京天捷

	CCC Mark China CCC is a certification mark for low-voltage (<1000V) electrical products. The Quality Certification Center for Import and Export (CQC) is a third party certification body set up by the State Administration for Entry-Exit Inspection and Quarantine(CIQ SA)to handle safety license applications.		CCEE Mark Old China National Certification safety mark / EMC mark has to be placed on the product, now replaced by the CCC mark

	CEBEC Mark The CEBEC-mark is a certification mark for low-voltage (<1000V) electrical products. The mark is particularly asked for by Belgian consumers, looking for safety, and by the appliance and installation industry, using electrical components with guaranteed quality.		CECC Mark for electronic components according to CECC Specifications. For electronic components according to CECC Specifications (CECC: CENELEC Electronic Components Committee) the CECC Mark may be used.

	CSA Mark The CSA mark may appear alone or with indicators. If it appears alone, it means that the product is certified for the Canadian market, to the applicable Canadian standards.		CSA "US" Mark The product is certified for the US market, to the applicable US standards.

	CSA "NRTL" Mark The product is certified for the US market, to the applicable US standards.		CSA "C/US" Mark the product is certified for both the U.S. and Canadian markets, to the applicable U.S. and Canadian standards.

	CSA "NRTL/C" Mark the product is certified for both the U.S. and Canadian markets, to the applicable U.S. and Canadian standards.		cTUVus Mark The cTUVus Mark denotes compliance to U.S. and Canadian National Standards

	Demko D mark A product with an D Mark shows compliance with harmonized European standards. It is used on electrical and electronic products. The Demko certification mark is well recognized in Denmark, throughout the Nordic countries, and in the rest of the European countries, particularly the European Union.		ETL Listed Mark The product with this mark on it has been certified by ITS. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. product safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued conformance.

	ETL Listed Mark with "us" identifier The product with this mark on it has been certified by ITS. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. product safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued conformance.		ETL Listed Mark with "c" identifier The product with this mark on it has been certified by ITS. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) Canadian product safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued conformance.

	ETL Listed Mark with "c" and "us" identifier The product with this mark on it has been certified by ITS. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S and Canadian product safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued conformance.		SGS Fimko FI mark A product with an FI Mark shows compliance with harmonized European standards. It is used on electrical and electronic products. The FI certification mark is well recognized in Finland, throughout the Nordic countries, and in the rest of the European countries, particularly the European Union.

	GOST mark The GOST Mark denotes compliance to the Russian standards		HAR Mark for cables and cords The HARmonization Marking or HARmonization Thread resp. is for cables and insulated cords according to harmonized certification procedures. Testing is based on the Harmonization Documents (HD) listed in the HAR Agreement. Products (harmonized power cables) tested and found in compliance with with the requirements of the mentioned standards may be marked with the HARmonization Marking.

	IMQ Mark The IMQ mark is issued to appliances and components and attests the conformance of electrical products to the requirements of the CEI standards.		IRAM mark The IRAM Mark denotes compliance to the Argentine standards

	ITS Worldwide EMC Verification Mark: The product with this mark on it has been certified by ITS. This verification mark indicates that the product has been tested to and conforms with the EMC (electromagnetic compatibility) requirements in the countries listed on the label. The manufacturing site has been audited.		ITS-GS Mark: A product with the GS Mark shows compliance to the German Device Safety Act (GSG). Since it is a licensed mark from the German government, it can only be authorized by an accredited safety certification agency whose name appears on the mark. ITS offers the GS Mark through our partnership with Dekra Certification services for electrotechnical products. It is highly recognized throughout the European Union.

	KTL mark The KTL Mark denotes compliance to Korean standards		Nemko mark Shows that the product is Safety Certified.The N certification mark is well recognized in Norway, throughout the Nordic countries, and in the rest of the European countries, particularly the European Union.

	Nemko- Safety EMC Mark Shows that the product is tested and certified as above, but signifies clearly that the product is certified for both safety and EMC by Nemko or by a Nemko authorized laboratory. In addition this mark confirms that the product also covers the EMC Directive, tested by Nemko or Nemko authorized laboratories.		Nemko-EMC Mark The product is only certified for EMC by Nemko.

	"Nemko Approved" Products certified by Nemko may if desired be tagged with the unique "Nemko Approved" label for use as advertising, shows, displays packages and also on the actual products.		NF Mark The French NF mark guarantees product conformity to French, European and international standards covering safety, quality, design purpose aptitude and performance for electrical installation and communication equipment, Electrical and electronic products, Houshold electronic appliances, Health and medical devices, Electronic components, Static electricity protection equipment

	Singapore PSB Mark The PSB Mark denotes compliance to Singapore standards or the equivalent IEC standards		T mark mandatory certification required in Japan. The T-Mark denotes compliance to the Japan standards

	S mark voluntary certification issued by JET in Japan.		SAA mark The safety SAA mark denotes compliance to the Australian standards

	Semko Mark: A product with an S Mark shows compliance with harmonized European standards. It is used on electrical and electronic products. The S certification mark is well recognized in Sweden, throughout the Nordic countries, and in the rest of the European countries, particularly the European Union.		Switzerland SEV S+ Mark The national safety approval mark for Switzerland is issued by SEV “ Schweizerischer Elektrotechnischer Verein”

	TUV-GS Mark TUV-GS Mark for appliances as technical equipment according to the GSG. The GS sticker indicates that the product was tested and certified for safety according to the "German Equipment Safety Law". The GS mark is a type-approval mark, followed by periodic factory inspections covering the quality system for the product’s production.		TUV-S Mark The TüV Rheinland S-Mark serves as a conformity mark to the Japan DENTORI law (Electrical Appliances and Materials Control Law).

	TUVus Mark The TUVus Mark denotes compliance to U.S. Standards		UL Listing Mark This is one of the most common UL Marks. If a product carries this Mark, it means UL found that samples of this product met UL’s safety requirements. These requirements are primarily based on UL’s own published Standards for Safety.

	C-UL Listing Mark This mark is applied to products for the Canadian market. The products with this type of mark have been evaluated to Canadian safety requirements, which may be somewhat different from U.S. safety requirements. You will see this type of Mark on appliances and computer equipment, vending machines, household burglar alarm systems, lighting fixtures, and many other types of products.		C-UL US Listing Mark It indicates compliance with both Canadian and U.S. requirements. The Canada/U.S. UL Mark is optional, separate UL Marks for the United States and Canada is also possible.

	UL Classification Mark The mark appears on products which UL has also evaluated. Typically, products Classified by UL fall into the general categories of building materials and industrial equipments, such as immersion suits, fire doors, industrial trucks, etc...		C-UL US Classification Mark It indicates compliance of products Classified by UL to both Canadian and U.S. requirements

	UL Recognized Component Mark specifically used on component parts that are part of a larger product or system. These components may have restrictions on their performance or may be incomplete in construction. The Component Recognition marking is found on a wide range of products, including some switches, power supplies, printed wiring boards, some kinds of industrial control equipment and thousands of other products.		UL Canadian Recognized Component Mark specifically used on component parts that are part of a larger product or system, and that are intended for Canada carry the Recognized Component mark "C."

	UL Recognized Component Mark for Canada and the United States May be used on components certified by UL to both Canadian and U.S. requirements. Although UL had not originally planned to introduce a combined Recognized Component Mark, the popularity of the Canada/U.S. Listing and Classification Marks among clients with UL certifications for both Canada and the United States has led to the new Mark.		VDE Mark for appliances as technical equipment according to the Appliance Safety Law (GSG), for Medical Device Law (MPG), components and installation materials. The VDE Mark indicates conformity with the German VDE standards or European or internationally harmonized standards resp. and confirms compliance with protective requirements of the applicable EC Directive(s). The VDE Mark is a symbol for electrical, mechanical, thermal, toxic, radiological and other hazards.

	VDE-GS Mark for appliances as technical equipment according to the GSG. For ready-to-use equipment, the licence holder may chose to affix the VDE Mark or the VDE GS Mark.		VDE-ENEC for products certified on the basis of harmonized certification agreements. Testing is based on harmonized European standards listed in the ENEC Agreement. Products (at present luminaires and related components, energy saving lamps, IT equipment, transformers, switches for appliances, electrical controls, certain types of capacitors and EMI suppression components) tested to tested to the listed standards may be marked with the ENEC Mark of the VDE. The approval of any other body participating in the ENEC Agreement is not required.

	VDE-EMC for appliances in compliance with standards for electromagnetic compatibility. The VDE EMC Mark expresses the conformity of a product with applicable standards for electromagnetic compatibility. The reliable function of the product in its electromagnetic environment is also included. The requirements for granting this mark comprise automatically and without restriction the compliance with applicable standards.		VDE Cable Mark For cables, insulated cords, installation conduits and ducts, the VDE Cable Mark is applicable.

	VDE Component Mark The VDE Component Mark may be used for electronic components.